Construction of brick walls: This is the point where the visible component of the structure is being constructed. Different types of blocks or bricks can be used to construct the walls of the structure, depending on the preference of the owner. Materials such as concrete blocks and fly ash bricks are used in the construction of the building in accordance with the structure spelled forth by the architect in the construction plan.
Masonry uses the cement mortar mixer to mix the cement and sand that will be used to keep the bricks together when they are positioned by the mason during construction. Building walls are erected with masonry, which carves out the structure of the windows and doors as it goes up. Following the construction of your wall, the lintel is constructed on top of the wall. A lintel, like the plinth beam and slab, is a beam that is put over the apertures of doors and windows. When a structure is erected above it, it is utilized to support the weight of the structure above it. If you’re interested in finding more information visit building contractors.
Roof coating: The roofing structure is the load that the lintel is responsible for supporting. The term “roof” refers to the frame of the highest layer of a structure to provide form covering, protection from harsh weather, as well as ornamentation and aesthetics. At this point, the structure is beginning to take shape, and you can get a sense of what the final dimensions of the structure will be. Different types of roofing materials may be used to enhance the aesthetics of your property.
Electrical and plumbing systems are included in this stage. Wires and pipelines in modern dwellings are kept out of sight to avoid attracting attention. In this case, it’s because they were put at this stage of the building construction and are concealed between the walls and slabs; only their ends are visible at this point in the construction process.
Finishing touches on the outside and inside: After the electrical and plumbing work has been done, the plastering work may be started. For the exterior of the structure, a mixture of cement and sand is utilized in the plastering process. It is covered with a thickness of 13 mm, and in certain cases with a thickness of around 20 mm. Plastering may improve the structural strength of a structure, protect it from the effects of the weather, and make it more visually appealing. The interior design is carried out by professionals in accordance with the procedures established by the architect. The construction of the structure is nearing its conclusion at this moment. After the external and interior decoration are done, the flooring work may commence. There are many different varieties of flooring, each with its own set of applications, cost, and level of finishing necessary. Ceramic tiles, vitrified tiles, clay tiles, granite, marble, wood, and epoxy flooring are just a few of the many alternatives available to you.
